|
- The data above is the test result base in certain working condition. The actual result will be varied depends in the input voltage,shape and size of electrode,spark condition,material of work piece and working fluid.
- Note:Specification is subject to change without notice.
 EBN (ZNC) Controller Specification : (AI, Fuzzy, Control)
- With Auto-Index function, operator can input working area, work piece material, depth and etc, system wizard will generate the spark parameters for user's reference.
- EDM parameters can be edited during EDMing. Via Fuzzy control, the OFF Time, ON Time, Working Time, Jump height, Jump Speed... are changed automatically in order to get the ultimate spark efficiency.
- Color CRT. PC Base, 32bit Industrial Level Computer (IPC).
- Chinese/English and Inch/Metric Mode.
- MOS-FET high power transistor and high speed POWER-SINK is used for spark Circuit Design.
- Reduce Electrode wear and increase working speed.
- Modules insert card design is used in power controller for easily maintain.
- FPGA (programmable) IC components are used for PULSE circuit design in order to have faster spark monitor contrl(Single pulse detect) and ARC detect.
- 2 groups of Coordinates can be switched and edited in order for base point setting.
- ABS depths and Rev. depth is selected base on the operator's custom.
- Single screen displacement for working conditions and working depths. Easy to read.
- 200 lines working condition. Operator can select any block as start and ending line. 50 sets of EDM parameters.
- Four steps manual moving speeds (x5 .x50 .x250 .x500µm), Jog mode has Jog, Feed and Proect/Non Proect functions.
- Z axis alignment function without manual edge find process. Easy and fast for finding edge. Current can be set as needed.
- From Rough cut to fine finish can be down automatically during EDM process.
- Z lock function is standard function. Orbiter can be used on this EDM machine.
|
|
|
Processes Examples
|
|
|
 |
|
 |
|
 |
|
|
 |
|
Safety
- Machine power will be shut off when the oil level is lower than the Fluid preset level.
- Machine power will be shut off when fire is detected.
- Auto-depth function can be set to retract and shut off the machine when the preset depth is reached.
- When short circuit is detected, machine power will be shut down automatically to prevent damage or fire hazard.
- Fire detection circuitry provides additional protection with fire extinguisher and automatic machine shut down.
- The single block provides system.
EBN (specially type)
The optional "Super sparking" feature is available for EDMing Tungsten Carbide or hardened steel over 50 RC.
- It improves working speed with hardened steel and carbide.
- The surface of the electrode is flat with lower wear.
|
|
|
Application Examples:
Improved Precision and Reliablity
 |
|
|
Go To :
|
|
Features (AI, Fuzzy, Control